PCD Full length edge Insert
SANCHUAN PCD Full Length Edge Inserts are suitable for Chamfering,flat surface and bulge part cutting
APPLICATIONS
| PCD tools are limited to non-ferrous materials, such as high-silicon aluminium, metal matrix composites (MMC) and carbon fibre reinforced plastics (CFRP). PCD with flood coolant can also be used in titanium super-finishing applications. |
- Aluminum and aluminum alloys
- Copper, brass and bronze alloys
- Zinc and magnesium alloys
- Carbon Fiber
- Epoxy resins
- Plastics
- Fiberglass composites
- Graphite composites
MATERIAL INTRODUCTION
| Material | Grain size | Features | Application |
| PD01E | 1 | PD01E fine grain size PCD material(1μm) is suitble for finishing applications.Its high impart resistance and high abrasive resistance are no less than that of rough grade of PCD. | PD01E has excellent chip resistance is suitable for the roughing and interrupt cutting aluminium alloys.This grade is also commonly used for non-ferrous finishing applications.Other successful applications include machining of wood,MDF. |
| PD10E | 10 | PD10E is the universal grade in the market.It`s the first choice for many applications where a good balance of toughness and wear resistance are required. | This Grade is commonly used for non-ferrous finishing applications.Other successful applications include machining of wood,MDF.The machining of low-medium content silicon aluminium alloys,carbide,hard rubber,graphite and so on. |
| PD32E | 2-30 | PD32E has a unique combination of wear resistance,edge strenth and edge quality.It contains a carefully sorted mix of micron diamond(Between 2 – 30 μm).The combination of these particle sizes and a specifically developed high pressure sintering process produces a structure with extreme abrasion resistance and good thermal stability. | Application areas include the machining of abrasive workpiece such as MMC,high silicon aluminium alloys as well as for the machining of carbide,hard rubber,graphite and other applications. |
| CVDD | – | CVDD is a pure carbon material without binder with extreme abrasion resistance and good thermal suitability.Due to its perfect cutting edge suitable fro appications where mirror finishes are required. | Application areas include the machining of abrasive workpiece such as MMC,high silicon aluminium alloys as well as for the machining of carbide,hard rubber,graphite and other applications. |
SanChuan Tools
CONTACT US
Email: cindy@sanchuan-tools.com
gavin@sanchuan-tools.com
Telephone: 86-132 9281 9760
China Office
Address: Dongsheng plaza, zhongshan road, shijiazhuang city, China
Germany Office
Address: Karl-Ferdinand-Braun Str. 5 28359 Bremen